Mokxi Circuits

Build working Arduino, ESP32 and Raspberry Pi Pico circuits with code in the Mokxi simulator through the Mokxi MCP server. Use when someone asks for an electronics project, a circuit, a sketch for a board, or "a Mokxi link".

Install

Direct install not available yet

Direct install is not available yet.

SKILL.md


Build circuits with Mokxi

Mokxi (mokxi.com) is a browser simulator for Arduino, ESP32, Raspberry Pi Pico, STM32 and more, with 500+ real parts. Through the Mokxi MCP server (https://mokxi.com/mcp) you can design a project, check it the way the Mokxi editor does, and hand back a link that opens and runs it.

Setup

Connect the Mokxi MCP server first:

  • Claude: Settings, Connectors, Add custom connector, URL https://mokxi.com/mcp, then sign in to Mokxi.
  • Claude Code: claude mcp add --transport http mokxi https://mokxi.com/mcp

Signing in to Mokxi is required. Free accounts can create 10 projects a day, and Mokxi Pro has no daily limit.

Workflow

  1. Pick the board. Call list_boards and choose the board the person asked for. If they didn't ask for one, pick the simplest board that fits (Arduino Uno for beginners, ESP32 for Wi-Fi or Bluetooth).
  2. Find the parts. For each part, call search_parts, then get_part to read its real pin names. Never guess pin names.
  3. Learn the format. Call get_project_format once per conversation, and follow it exactly for the diagram and the files.
  4. Write the project. Wire every part with the pin names from get_part, and add the resistors a real circuit needs (for example 220 ohm for an LED). Write the sketch for that board's core, using the same pins as the wiring.
  5. Check it. Call validate_project. If it reports problems, fix them and validate again. Repeat until it passes.
  6. Hand it back. Call create_project and give the person the link, with one or two lines on what to press (Run) and what they'll see.

Rules

  • Only use boards and parts the tools return. If a part doesn't exist in Mokxi, say so and suggest the closest one it has.
  • Keep the first version small and working, then offer upgrades.
  • Mokxi simulates circuits. It does not control real hardware. For anything with mains voltage, say it isn't safe to wire to a microcontroller, and use low-voltage parts in the simulation.
  • Explain the circuit in plain words for beginners: what each part does, and which pin it uses.

Example requests

  • "Build an Arduino traffic light with three LEDs and give me the Mokxi link."
  • "Make an ESP32 that reads a DHT22 and shows the temperature on an SSD1306 OLED."
  • "I have a Pico and a servo. Make it sweep back and forth."

Discussion

Discussion

0